Aluminum Roll Valley & Coil Stock

• Seamless.
  • Stock:
    • 14" mill finish unpainted - .0092" thick - 10' roll
    • 14" mill finish unpainted - .012” thick - 50' roll
    • 12” white/brown painted reversible - .0165” thick - 50' roll
    • 24" white/brown painted reversible - .018" thick - 50' roll
    • 24" white/clay painted reversible - .018" thick - 50' roll

Aluminum Roof Edgings

• Stock:
  
  • 10’ overhang drip edge with 1" wide face (white, brown, black, or clay)

  
  

  • 10' overhang drip edge with 1.95" wide face (white)

  

  • 10’ channel roof edge (white or brown)

  

  • 10' 1”x3” rake/drip edge (white or brown)

  

ShingleVent^® II Ridge Vent

• Shingle-over ridge vent with built-in end plug.
• Matching shingles can be installed over the vent, allowing the vent to appear almost invisible from the ground.
• External baffle and internal weather filter provide optimum airflow and weather protection.
• Provides a more complete barrier to help protect the attic from wind-driven rain, snow, dust, and insects.
• Conforms to roof pitches up to 16/12.
• 18 square inch net free area per linear foot.
• Lifetime, limited warranty.
• Click here for more information.
  • Stock:
    • 4' length

 Cor-A-Vent^® V-400E Ridge Ventilation System

• 17 sq. in. of net free area per foot.
• Comes with enhanced snow screen.
• Can be applied on hip roofs.
• Solid base provides a weather-tight seal under vent.
• Won’t crack or shatter in cold weather application.
• No baffles to clog with leaves or pine needles.
• Lifetime warranty.
• Click here for more information.
  • Stock:
    • 4’ length

Lomanco^® LOR-30 Shingle-Over Ridge Vent

• Rollable and gunnable shingle-over ridge vent.
• Superior weather performance with no filter to clog.
• Adjusts from 2/12 to 16/12 roof pitches.
• 11 sq. in. of net free area per foot.
• 30-year transferable warranty.
• Click here for more information.
  • Stock:
    • 30’ roll

    

Roof Vents

• Self-flashing.
• Each vent provides 50 square inches of net free vent area.
• Aluminum.
• Use on hip or gable roofs.
  
  • Stock:
    • Black
    • Brown
    • Mill finish (unpainted)

Shingle Starter Roll

• Owens-Corning brand.
• Eliminates the need to cut shingles to create a starter row.
• Saves installation time.
• Simply apply a course of starter shingle roll along a clean, dry rake or eave edge after removing the release sheet.
• Apply directly to felt or underlayment.
  • Stock:
    • 7" x 33' roll

Z-Stop^® Zinc Roofing Strips

• Installed at ridge to inhibit growth of moss and fungus below.
• Completely safe for roofing shingles.
• Works better, lasts longer, and is safer than roof cleaning and chemical moss control or moss killer.
• Works on any roofing material made of composition, flat tile, metal, shingles, or cedar shakes.
• Includes nails.
  • Stock:
    • 2-1/2”x50’ coil