Concrete Steps & Risers

Precast. Use an individual step only or combine steps with risers when multiple steps are necessar. Steps are reinforced with two embedded steel rods. Bond components to one another with ready-mix concrete or concrete caulk.

STEPS

• 12" base depth.
• 13" tread depth.
• 7" riser height.
  • Stock:
    • 3' width step
    • 4' width step
    • 6' width step

risers

• Use one at each end of mutliple step installations.
• Sold by the pair.
  • Stock:
    • 2-step high risers
    • 3-step high risers

Blacktop Patch

all weather blacktop patch

• High performance patching material with good compaction for long-lasting repairs.
• Use for the patch and repair of potholes in blacktop walks, drives, and parking lots.
• Use in wet or dry conditions, in any temperature.
• Ready-to-use, workable mix with high bonding characteristics.
  • Stock:
    • 60 lb. bag

U.S. COLD patch

• Ready-to-use asphalt product provides for the permanent patching of potholes, cracks, and other defections in blacktop and concrete.
• Stronger and easier to use than other pothole repair products.
• Drive on immediately after use - sets instantly.
• Odorless recycled material virtually eliminates the harmful VOC vapors found in other products.
  • Special order:
    • 50 lb. bag

Concrete Form Tubes

• Cardboard tube provides easy means of forming concrete post pier in all types of soil conditions.
  • Stock:
    • 8” x 48”
    • 12” x 48”

Expansion Joint

• Asphalt impregnated wood fiber.
  • Stock:
    • 1/2" x 3-1/2”-8’

Plaster

• Stock:
  • No. 1 moulding plaster – 50 lbs.
  • Plaster of Paris – 4 lbs.
  • Plaster of Paris – 8 lbs.
  • Plaster of Paris – 25 lbs.

Pea Pebbles

• Stock:
  • Pea pebbles - per .5 cubic foot bag

Sand

• Stock:
  • Play sand – 50 lbs.
  • Fine white silica sand - 50 lbs.
  • Traction sand for use in beds of pickup trucks to provide weight over drive wheels – 70 lb. tube

Steel Reinforcing Bar

• Adds strength to concrete.
• Handy for pinning landscape timbers in place.
  • Stock:
    • 1/2" x 36”
    • 1/2" x 72”

Fast-Setting Concrete Mix

• Sets in just 1/2 hour - much faster than regular concrete!
• Set posts and poles without bracing or mixing.
• Professional strength 5000 psi (pound per square inch) for commercial structural applications and superior durability.
• Exceeds strength requirements of ASTM C 387.
• Use for applications requiring at least 2 inches in thickness.
• Click here for more information.
  • Stock:
    • 50 lb. bag

Ready-Mix Concrete & Mortar

• Concrete in coarse or fine aggregate blends. Mortar in standard clean sand mix.
• Just add water!
  • Stock:
    • Ready-mix concrete, high strength, coarse for applications 2" or thicker – 80 lbs.
    • Ready-mix concrete, sand mix, fine for applications 1/2" to 2" thick – 80 lbs.
    • Ready-mix mortar – 80 lbs.

Portland Cement & Mortar

• Stock:
  • Gray Portland cement, type 1A – 94 lbs.
  • Brick mortar, type N – 70 lbs.

DAP® Ready-Mixed Concrete Patch

• Used to patch small cracks and breaks, or spot level concrete and masonry surfaces such as basement walls, patios, steps, sidewalks, and driveways.
• Can be used as a “glue” to join broken pieces of concrete or brick.
• Dries to a durable, hard finish.
• Non-shrinking.
• Interior/exterior use.
• Gray.
• Click here for more information.
  • Stock:
    • 31084 Quart
    • 31090 Gallon

Super Thoroseal® Waterproof Coating

• Waterproof, cement based, decorative finish for concrete and masonry.
• White, dry-polymer modified coating.
• Excellent adhesion, flexural strength, durability and freeze/thaw resistance.
• Weatherproof and seals out dampness..
• Stops seeping water and cuts radon gas infiltration.
• For interior or exterior use, above or below grade.
• Fills and seals pores and voids to correct surface irregularities.
• Protects concrete, masonry, stucco and foam substrates.
• Becomes part of the wall when fully cured.
• Resistant to mold and mildew.
• Apply thickly with tampico fiber brush.
• Cleans up with soap and water immediately after use.
• For basement walls, foundation walls, retaining walls, concrete planters and walls, concrete and cinder block, brick, stucco, and sea walls and piers.
• Coverage (per 35 lb. pail):
  • Base coat - 155 square feet at 1/16 inch dry-film thickness
  • Top coat - 310 square feet at 1/32 inch dry-film thickness
    • Stock:
      • 35 lb. pail

Thoroseal® Waterproof Cement-Based Coating

• Waterproofs and protects building interiors from dampness, moisture, or seepage.
• Ideal for interior or exterior, above or below grade; vertical, overhead, and non-traffic bearing surfaces.
• Recommended for cast-in-place concrete, pre-cast concrete, brick, common block, stucco, unglazed terra cotta, porous stone, gunite, and other masonry substrates.
• Locks water out or holds it in by actually becoming part of the wall.
• Fills and seals pores and voids to correct surface irregularities.
• Resistant to mold and mildew.
• Compatible with a wide range of architectural coatings and textured finishes.
• Comes in dry powder form; must add Acryl® 60 and water to mixture.
• Cleans up with soap and water immediately after use.
• Coverage (50 lb. bag):
  • Base coat – 225 square feet at 1/16 inch dry-film thickness
  • OR top coat – 450 square feet at 1/32 inch dry film thickness
  • Coverage will vary depending on surface texture and porosity.
• Click here for more information.
• Click here for application information.
  • Stock:
    • 50 lb. bag – white
    • 50 lb. bag – gray

Thoroseal® Foundation Coating

• Heavy, cement-based coating.
• Bonds well with concrete and masonry substrates.
• Recommended for concrete, masonry, basement walls, and foundation and retaining walls.
• Resistant to both positive and negative hydrostatic pressure.
• Will not “blow off” exposed side of wall.
• Breathable; allows interior moisture to escape without damaging coating.
• Locks deep into pores and voids to become part of the wall when fully cured.
• Gray in color to blend into cement block and concrete walls.
• Resistant to mold and mildew.
• Apply with a push broom or 6” masonry brush.
• Can also be mixed with clean washed sand and trowel-applied as a superior waterproofing coating.
• This is the best product we know of for bonding styrofoam to the outside of masonry walls.
• Can be used above grade, but not intended as a decorative finish coat.
• Comes in dry power form; Acryl® 60 can be added to mixture.
• Cleans up with soap and water immediately after use.
• Coverage (50 lb. bag):
  • Base coat – 225 square feet at 1/16 inch dry-film thickness
  • OR top coat – 450 square feet at 1/32 inch dry film thickness
  • Coverage will vary depending on surface texture and porosity.
• Click here for more information.
• Click here for application information.
  • Stock:
    • 50 lb. bag – concrete/dark gray

Thorobond® Water-Based Bonding Agent

• Polyvinyl acetate, liquid adhesive bonding agent.
• Use on masonry, gypsum plaster, concrete, and wallboard before topping with plaster or concrete mortar.
• Also recommended for concrete block, wood, metal, concrete slabs, glass, stucco, marble, drywall, and tile.
• Adds extra bonding strength between substrate and new coating.
• Apply by brush, roller, or spray.
• Tinted for easy visual confirmation of coverage.
• When cured, resistant to alkali attack from cement-based and masonry materials.
• Not for use on substrates where constant exposure to wet conditions such as directly adjacent to swimming pools.
• Comes ready to use – nothing to add! Just hand stir.
• Cleans up with soap and water immediately after use.
• Coverage: 200 to 300 square feet per gallon, depending on porosity and surface texture.
• Click here for more information.
• Click here for application information.
  • Stock:
    • Gallon

Acryl® 60 Liquid Admixture

• Acrylic polymer, water-based liquid.
• Mix with any cement-based material to improve adhesion, cohesion; tensile, compressive, and flexural strength.
• Recommended for cement mortars, plasters, stuccos, concrete mixes, and most cement-based materials.
• Add to concrete for resurfacing driveways, floors, or walks.
• Promotes long-lasting repairs.
• Adds extra toughness and crack-resistance to cement-based mixes.
• Use for interiors or exteriors; above or below-ground.
• Improves freeze/thaw stability of cement-based materials.
• Ideal where hard, strong, fast-curing material is required for patching, repairing, or surfacing.
• Milky white, colorless and non-yellowing to mixture.
• Stable, will not re-emulsify when exposed to water.
• Easy to use; one component-liquid mixes easily with water.
• Use straight in place of water for tough bonding problems or mix equally with water for large overlays.
• Cleans up with soap and water immediately after use.
• Coverage will vary depending on the suggested mixing ratio for particular uses.
• Click here for more information.
• Click here for application information.
  • Stock:
    • 1 quart bottle
    • 1 gallon bottle
    • 5 gallon bucket

Waterplug® Hydraulic Cement

• Portland-cement-based repair mortar to repair holes or cracks flowing with water.
• Use above or under water or where water is flowing under constant pressure.
• Recommended for masonry, concrete, basements, foundations, retaining walls, sewers, sea wells, water storage facilities, tunnels, fountains, water channels and rains, ponds, and piers.
• Suitable for drinking water systems.
• Quick-setting, non-shrinking, permanent.
• Expands as it hardens to lock in place and form a perfect seal.
• Dries in 3 to 5 minutes.
• Use interior or exterior; above or below-grade; vertical or overhead on non-moving cracks or joints.
• Completely waterproof, suitable for immersion service.
• Easy to use; one-component powder mixes easily with water.
• Cleans up with soap and water immediately after use.
• Coverage: 2-1/2 pounds fills approximately 39 cubic inches.
• Click here for more information.
• Click here for application information.
  • Stock:
    • 10 lb. can
    • 50 lb. pail

HENRY® 527 TileFlex Plus™ Flexible Thinset Mortar

• Portland cement-based.
• Used for the installation of porcelain, quarry, stone, ceramic, and mosaic tile over most interior and exterior surfaces.
• Can also be used to install porcelain tile over interior plywood floors.
• Coverage: 90 to 100 sq. ft. per 50 lbs. bag with 1/4”x1/4”x1/4” square-notched trowel.
  • Stock:
    • 25 lb. bag

HENRY® 544 Floor Leveler Self-Leveling Underlayment

• Cement-based.
• Use to level and smooth interior concrete and other surfaces prior to the installation of ceramic tile and other floor coverings.
• Hardens quickly and is walkable in 4 hours, allowing tile to be installed in 6 to 8 hours.
• Covers 40 sq. ft. at 1/8” thickness.
  • Stock:
    • 40 lb. bag

HENRY® 547 UniPro™ Universal Underlayment

• Cement-based.
• Used as a patch, underlayment, or embossing leveler.
• Bonds to concrete, wood, steel, stainless steel, brass, lead, ceramic, terrazzo, existing “cutback” residue and existing resilient (as an embossing leveler) on all grade levels as recommended; metal substrates must be clean and abraded.
• Extremely versatile.
• High compressive strength.
• Fast-setting.
• Excellent fill characteristics; non-shrinking.
• Non-sanded formation.
• Click here for more information.
  • Stock:
    • 10 lb. box

HENRY® 549 FeatherFinish™ Underlayment Patch & Skimcoat

• Portland cement-based.
• Use for patching, skimcoating, and featheredging interior concrete, masonry, wood, cementitious terrazzo, and ceramic tile.
• Can also use to smooth ridges or to fill cracks, gouges, and joints.
• Provides a smooth and permanent finish prior to the installation of floor coverings.
• Can be applied to any prepared surface using a steel trowel.
• Dries in 15 minutes; allows floor-covering installation to proceed with minimum delay.
• No primers or additives needed.
• Will not stain or mildew.
  • Stock:
    • 7 lb. box